Our huge infrastructure facility has enabled us to manufacture, export and supply Jaw Crusher. This Crusher is manufactured using ultrasonically tested & approved steel plates and other components to ensure maximum strength and minimize vibration during operations. Our offered crusher is comprehensively examined by our quality controllers on various factors to eradicate the possibility of any manufacturing defect. The offered Jaw Crusher is extensively used for road construction, mining and metallurgical applications. Features of the offered product are enlisted below:
Other information:Main Frame (Body)
"Yagnam" Crushers bodies are fabricated from high class quality ultrasonically tested steel plates (IS 2062)). Ribs are provided along the line of stress to give maximum strength and minimize vibration.
An En Series Carbon Steel shaft is used, which is finished to a high degree of accuracy to give an exact stroke to the swing jaw. The raw material is ultrasonically tested & then hardened to ensure a long life.
Heavy duty self- aligning special double roller are fitted to give smooth and economical running of the machine. The bearing used withstand very heavy loads and fluctuations on the line of action of the shaft.
Theo Jaw stock (levers) is made of high quality cast steel castings (IS 1030) with deep webbing to give it great strength. The bearings seat (bore) of the jaw stock is give very high finish using carbide tools.
Cast Toggle Plates are used which act as a "fuse", in case of overloads. They are seated on tempered toggle bearings.
Jaw Plates are made of high grade Chrome- Manganese Steel and they can be reversed end to end, to give maximum life to each jaw plate.
Side Wearing Plate
They are also made of high grade Chrome- Manganese Steel which saves the body from wearing.
Well balanced large diameter flywheels (Flat and "V") are provided, which can be interchanged from side to side. Counter weights are added to balanced the eccentricity of the Shaft.
Grease nipples are provided at the right places for long life of the bearing.
Average output in Brass (per 8 Hrs)
Secondary Crusher (Granulators)
Jaw Settings at Opening shown (in mm)
Secondary Crusher Granulators
1 Brass= 3cu.m= 100cft= 4 Tons (approx)
Tonnage may depending on the size of feed, rate of feed, operating condition, breaking characteristic & compressive strength of rock.